This 1 Units slide mounting Rack/Cabinet shelf, features secure placement & vented air housing for various mounting purposes. The shelf has Small lip at front of shelf to prevent products from sliding. Turn shelf over to mount as flat surface.
These relay rack shelves are compatible with most 19 EIA standard 2Post relay racks. These relay rack shelves have a 55.11 lb. equipment capacity and will support a wide variety of electronic equipment. Electronic devices up to 14 deep can be supported on a relay rack shelf. Transport and seismic options are available for these relay rack shelves if the installation requires.
The Strong Mount is a trusted name is Cabinet/ Racks and other Mounting Solutions, offering a durable & affordable mounting Solutions backed by Lifetime Warranty.
Tech Note: These relay rack shelves can be installed in a 2 Post or 4 Post server rack. Shelf width is measured from front to rear excluding flanges. Vents layout & designations may vary based on current inventory availability.
|Materials & Finished Coating||SPCC cold rolled Steel 1.5mm. W/Black textured powder coat.|
|Mounting Depth Range||These relay rack shelves are cantilever mounted and will install into any 2 Post relay rack, as well as any 4Post server rack|
|Overall Installation Depth||12 (30.5 Cm)|
|Included Hardware||10-32 & 12-24 pan head screws|
|Assembly Notes||Phillips head screwdriver required|
|Hole Type||10-32 or 12-24 threaded holes Square hole relay racks will require cage nuts|
Fits any 4 Post rack
- Fits square, round, threaded holes
- 12″ sliding shelf
- Adjustable mounting depth
- Equipment depth: 20.8″
Sliding shelf for servers, desktops
- Weight capacity: 55 lbs (25 kgs)
- Tower-to-Rack conversion
- Dell, HP, IBM compatible
- High quality, ball bearing slides
- Medium size desktops & workstations
- Non-rack-mountable equipment
- Peripheral devices
Package includes: 4pcs of M6 Screws and 4pcs of M6 Cage Nut (Black)
» Dimension (DxWxH) (26x19x2) inches
» Package includes 4pcs of M6 Screws and 4pcs of M6 Cage Nut (Black)